{"product_id":"raypak-rheem-ruud-heaters-twph-455-0eht08-raypak-twph-4550eht08-high-efficiency-pool-heater-455-000-btu","title":"Raypak TWPH-4550EHT08 Crosswind V 4550 Pool \u0026 Spa Heat Pump, Heat Only, 85,000 BTU, 5.8 COP, 208-230 V, Rheem TWPH-4550EHT10","description":"\u003cp\u003e\u003cstrong\u003eRaypak Crosswind V 4550 Pool \u0026amp; Spa Heat Pump, 85,000 BTU, 5.8 COP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel TWPH-4550EHT08\u003c\/strong\u003e | 85,000 BTU at 80\/80\/80 | 5.8 COP | Heat only | 208-230 V single phase | Raymote Wi-Fi control\u003c\/p\u003e\n\u003cp\u003eThe Crosswind V 4550 is the smallest size in Raypak's Crosswind V line of vertical-discharge heat pumps for residential pools and spas, and this is the Standard heat-only model. It takes heat from the outside air and moves it into the pool water through a titanium tube heat exchanger, and is rated at 85,000 BTU per hour with a 5.8 COP at 80 degrees F air, 80% humidity and 80 degrees F water. Its control connects to Wi-Fi for the Raymote phone app and can also run valve actuators, a pump and auxiliary pool equipment.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eMade for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eResidential pools and spas on 2 in. plumbing with a 208-230 V, single-phase supply.\u003c\/li\u003e\n\u003cli\u003eOutdoor installation only. Raypak does not certify the Crosswind V for indoor use; it cannot go in a shed or garage or under a deck or porch.\u003c\/li\u003e\n\u003cli\u003eRaypak's minimum recommended water flow is 20 GPM. Above 40 GPM the 4550 needs an external bypass; Raypak's bypass assembly kit 100-10000816 is sold separately for Standard models.\u003c\/li\u003e\n\u003cli\u003eHeating only. Pool cooling (Cool Mode) is on Raypak's Deluxe heat\/cool models, TWPH-6550EHC08 and TWPH-8550EHC08.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e🔧 \u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeating output and COP, tested to AHRI 1160, with 80 degrees F water: 85,000 BTU\/h and 5.8 at 80 degrees F air and 80% humidity; 80,000 and 5.5 at 80 degrees F air and 63% humidity; 56,000 and 4.0 at 50 degrees F air and 63% humidity.\u003c\/li\u003e\n\u003cli\u003eElectrical: 208-230 VAC, single phase, 60 Hz. Input 4.3 kW. Minimum circuit ampacity 38 A. Breaker 50 A minimum, 60 A maximum; Raypak recommends 50 A.\u003c\/li\u003e\n\u003cli\u003eRefrigerant: R-410A.\u003c\/li\u003e\n\u003cli\u003eHeat exchanger: titanium tube.\u003c\/li\u003e\n\u003cli\u003eWater connections: 2 in. PVC unions, reached through the front panel. Two union halves come with the heater.\u003c\/li\u003e\n\u003cli\u003eControl: digital display with pool, spa and timed spa modes, and Wi-Fi for the Raymote app. Pool setpoint limit adjustable up to 95 degrees F, spa up to 104 degrees F.\u003c\/li\u003e\n\u003cli\u003eBuilt-in automation: outputs for two valve actuators, a single-speed or variable-speed pump and auxiliary on\/off equipment such as lights or water features. The control can also call a gas or electric heater as auxiliary heat.\u003c\/li\u003e\n\u003cli\u003eCabinet: powder-coated metal, about 33.8 in. wide x 33.8 in. deep x 37.8 in. high, with a four-blade fan that discharges upward.\u003c\/li\u003e\n\u003cli\u003eWeight 260 lb; 278 lb shipping. Shipping carton 38.75 x 38.75 x 42.5 in.\u003c\/li\u003e\n\u003cli\u003eIn the carton: four hurricane tie-down brackets with 16 screws, two union halves, the optional control harnesses, the manual and the warranty.\u003c\/li\u003e\n\u003cli\u003eRaypak limited warranty: 2 years labor, 7 years parts and 10 years on the titanium tube of the heat exchanger, when installed by a licensed service provider.\u003c\/li\u003e\n\u003cli\u003eUPC 662021604584.\u003c\/li\u003e\n\u003cli\u003eRheem cross-reference: Rheem item TWPH-4550EHT10 is the same heat pump sold under the Rheem label.\u003c\/li\u003e\n\u003cli\u003eRuud cross-reference: Ruud item TWPH-4550EHT11 is the same heat pump sold under the Ruud label.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e📌 \u003cstrong\u003eGood to know:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA heat pump puts out less heat per hour than a gas heater and may run many hours a day to hold temperature. Raypak recommends covering the pool when it is not in use.\u003c\/li\u003e\n\u003cli\u003eLeave 5 ft of open space above the unit and 1 ft on each side for service, and keep it at least 3 ft from any gas or other fuel-burning heater.\u003c\/li\u003e\n\u003cli\u003eChlorinators and chemical feeders go after the heater, with a check valve or Hartford loop between them.\u003c\/li\u003e\n\u003cli\u003eIf the heater sits below the pool water line, the water pressure switch may need adjusting, and Raypak's manual calls for an external water flow switch (kit H000166, not included).\u003c\/li\u003e\n\u003cli\u003eElectrical connection is for a licensed electrician, and any work on the sealed refrigerant circuit is for a qualified technician.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGas, venting and electrical work must be done by a qualified installer and meet local codes.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48314583515355,"sku":"TWPH-4550EHT08","price":4100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/8343\/5483\/files\/149Z79-0YacyCuWZlFBtfRrB9jfahaOPH.jpg?v=1791053149","url":"https:\/\/premierpools.com\/products\/raypak-rheem-ruud-heaters-twph-455-0eht08-raypak-twph-4550eht08-high-efficiency-pool-heater-455-000-btu","provider":"Premier Pool \u0026 Spa","version":"1.0","type":"link"}