How to Connect the InTouch 2 App on an Arctic Core or Classic Spa
How to connect InTouch 2 on an Arctic Core or Classic Spa
To connect your in.touch module to a wireless network, use the Up/Down keys to go to the Wi-Fi option in the Settings menu and Light key to select it.
After a few seconds the available networks will appear on the screen, as well as their signal strength. Use the Up/Down keys to move through the list.
Select your network by pressing on Light key. If the Wi-Fi network is password protected enter it when prompted.
• Use the arrow keys to choose your letters and change the type of character (uppercase, lowercase, number, symbol).
• Use Key 2 to move the curser forward
• Use Key 1 to backspace
• Use Light key to confirm.
If no password is required the in.touch will connect automatically. Once the in.touch module is connected to a Wi-Fi network a check mark in a green circle will appear in the Wi-Fi menu, and the network logo will change to green in Settings menu.
Note: Wi-Fi logo color in Settings menu corresponds to the in.touch connection state.
- Green: connected to a network
- Yellow: not connected
- Yellow with Wait Icon: connection attempt to a network
- Red with Wait Icon: in.touch no longer detected (in.touch must be reset before next connection attempt)
