Raypak 009834 Outdoor Stack Kit (High Wind Top), 6" Flue, for 206A and 207A Heaters

Raypak 009834 Outdoor Stack Kit (High Wind Top), 6" Flue

Part # 009834 | Genuine Raypak accessory | For 206A and 207A pool and spa heaters installed outdoors

This kit fits a painted outdoor stack to a Raypak 206A or 207A gas heater installed outdoors; Raypak's manuals call it the outdoor stack kit, and it is sold as the high wind top. These heaters come with a stackless outdoor top, and Raypak lists the outdoor stack as optional equipment. The stack is the vent termination, so no vent pipe is added to it.

✅ Fits these Raypak models:

• Raypak 206A digital (electronic ignition) heaters
• Raypak 207A digital Low NOx heaters (Raypak dates the residential 207A to 2004 through 2023)
• Raypak 206A millivolt heaters (built 2004 to 2020)
• Other cabinet sizes take a different kit: 009835 for the 266A, 267A and 268A, 009836 for the 336A and 337A, 009837 for the 406A, 407A and 408A

🔧 Details:

• In the box, per Raypak: 1 painted outdoor stack, 1 adapter plate, 3 mounting brackets (clips), 1 top panel cover, two 1 ft sections of metal tape, 3 screws and the instructions
• Sized for the 6 in. (152 mm) flue of the 206A and 207A
• Stack height, per Raypak's dimension note: the heater's J dimension plus 6 in. (152 mm). J is 11-3/4 in. (298 mm) on the 206A and 207A
• Clearance above: Raypak calls for unobstructed space over an outdoor stack
• Optional equipment: Raypak does not supply it with the heater

📌 Good to know:

• For outdoor installations only. A heater installed indoors needs the indoor stack kit (009838 for this size) and a vent to the outside.
• Raypak's Digital Tool Box Guide lists high wind among the things to check when the rollout switch opens, and wind as a probable cause of ignition failures and lockouts. It lists other causes as well (gas pressure, combustion air, a blocked heat exchanger, vent size and connections) and does not name this kit as the remedy.
• Follow the instructions packed with the kit. Work on a gas heater's venting is for a qualified installer.

Check your heater's model and serial number before ordering.