Arctic Classic Series Topside Controls - Choosing your Filtration Settings
Arctic Classic Series Topside Controls
Settings:
From the home page you can access the settings where you will find:
- Water Care
- About
- Maintenance
- Wi-Fi
- Restore
- Standby
- Date & Time
- Configuration
- Audio (if installed)
Use the arrow buttons to move UP and Down in the list. To select an option, press the light beside it. At any point, you can press the settings button to return to the home screen.
To see and/or modify a Water Care category, use the light button to the right (button 1) to open the selected Water Care Menu. Use the arrow buttons to choose a schedule to modify (choice of economy and filter schedules). Use the light key to move between parameters. 
You have several possibilities for the schedule (Mon – Fri, weekends, every day, or single days). The schedule will be repeated every week.
The time and duration are set in 30 minute increments. Once you have set the schedule, use button 1 to go back. Ensure that you have selected the desired Water Care option in the main Water Care menu.
Water Care:
The water care section will help you set up your ideal filtration and heating settings. Choose a mode depending on your need. Use the Light button to choose your setting. A checkmark will appear on the selected icon to confirm.
Economy Mode: The set temperature point will be reduced by 20F which means that the heating system is not engaged unless the temperature falls to 20F below the spas set temperature.
Away: In this mode the Spa will always be in economy; the set point will be reduced by 20º F.
Standard: The Spa will never be in economy mode and will be filtering according to the pack’s low-level configuration.
Energy Savings: The Spa will be in economy mode during the peak hours of the day and resume normal mode on the weekend.
Weekender: The Spa will be in economy mode from Monday to Friday and will run normally on the weekend.
