Raypak 014784 Above Ground Digital P-R156A-EN-C Pool & Spa Heater, Natural Gas, 0-4999 ft, Copper, Polymer Headers (Rheem 014802)
014784
Raypak item 014784: Above Ground Digital P-R156A-EN-C pool and spa heater, natural gas, 0-4999 ft.
A gas-fired heater with polymer headers, digital control and electronic ignition for heating residential pools and spas.
Product details
| Part number | 014784 |
|---|---|
| Manufacturer | Raypak |
| Description (per Raypak) | P-R156A-EN-C: Polymer Headers, Digital Control, Electronic Ignition, Natural Gas |
| UPC | 840891035794 |
| Gas type | Natural |
| Elevation | 0-4999 ft |
| Heat exchanger | Copper, polymer headers |
| Weight | 100 lb |
| Raypak reference | Raypak Residential Pool & Spa Product Catalog RP-P-902-6 rev D p. 61, 93 |
The Raypak 156A is the digital model in the Above Ground series, an atmospheric gas heater for above-ground pools and spas. A touchpad and LCD set the pool and spa temperatures and report status and faults in plain words, and the heater accepts a two-wire or three-wire remote.
- The propane 156A is item 014786; item 014785 is the 5,000 to 9,999 ft natural gas version.
- Outdoor installation as shipped, using the stackless top. Indoor installation needs Raypak drafthood kit 014358 and a vent to the outside.
- Pump flow between 20 and 70 GPM. Above 70 GPM Raypak requires an external bypass valve.
- Raypak states the Above Ground series cannot be sold in Low NOx markets, including Southern California and Utah.
- Raypak lists the Above Ground series at 82% thermal efficiency.
- Natural gas supply pressure at the heater: 5 in. WC minimum with the heater running, 10.5 in. WC maximum. Gas connection 1/2 in. NPT.
- Digital control with POOL and SPA modes and a power switch. Setpoint range 65 F to 104 F as shipped. A service menu shows pilot flame strength, supply voltage, run time, cycle count and the last ten faults. Remote-ready through the supplied 7-pin connector.
- Spark-to-pilot electronic ignition; the main gas valve opens only after the pilot flame is proven.
- Stainless steel tube sheets with a built-in automatic bypass valve.
- Ships with a 120 VAC three-prong cord; the transformer can be rewired for 240 VAC. Draws 4 A at 120 V or 2 A at 240 V. Raypak requires a grounded, GFCI-protected supply.
- Water connections: two 2 in. CPVC unions, supplied. PVC pipe can be glued directly into them.
- Cabinet depth 27 in. Flue diameter 6 in.
- In the carton: two 2 in. CPVC unions with O-rings, plastic finish flange for the gas line, bonding lug and the manual. The outdoor stackless top is standard.
- Raypak limited warranty: two years parts and labor, or one year when installed anywhere other than a single-family home. The warranty applies to heaters installed by a licensed service provider.
- Rheem cross-reference: Rheem item 014802, model P-M156A-EN-C. Ruud cross-reference: Ruud item 014820, model P-D156A-EN-C.
Good to know: The heater must sit at least 5 ft from the inside wall of the pool unless a solid fence, wall or other permanent barrier separates them. It can be installed on combustible flooring, but not on carpet. For sites with frequent high wind Raypak offers an optional outdoor stack, part 014719. Raypak reduces the input 4% for each 1,000 ft above sea level when installed above 2,000 ft; for such sites Raypak says to consult the factory. Converting to propane takes Raypak kit 014915F and must be done by a qualified agency. Gas, venting and electrical work must be done by a qualified installer and meet local codes.
Out of stock? Get a quote.
We can usually source this item from our suppliers. Leave your details and we will text or email you a quote, typically within one business day.