Raypak 017371 Digital ASME B-R206A-EN-C #50 Pool Heater, Natural Gas, 199,500 BTU, Copper Heat Exchanger, Bronze Headers
017371
Raypak item 017371: Digital ASME B-R206A-EN-C #50 pool heater, natural gas, 199,500 BTU. A natural gas ASME pool and spa heater with a copper heat exchanger, rated for elevations from 0 to 2000 ft.
Product details
| Part number | 017371 |
|---|---|
| Manufacturer | Raypak |
| Description (per Raypak) | UNIT-C/P B-R206A-EN-C #50 ASME |
| UPC | 840891041535 |
| Input | 199,500 BTU/h (58.4 kW) |
| Gas type | Natural |
| Elevation | 0-2000 ft |
| Heat exchanger | Copper |
| Shipping weight | 210 lb with stackless top |
| Raypak reference | Raypak Residential Pool & Spa Product Catalog RP-P-902-6 rev D p. 15 |
The Raypak Digital ASME 206A is the code-stamped version of the Digital atmospheric gas heater. Bronze headers and an ASME-certified copper fin-tube heat exchanger take the place of the polymer headers used on the residential model, for pools and spas where an ASME heater is required, typically commercial sites.
Related items
- The propane ASME 206A is a different item number (017383).
- Raypak also lists item 017375 with the #51 orifice and item 017379 with the #52 orifice; on copper models Raypak gives #51 for 2,000 to 6,000 ft and #52 for 6,000 to 9,000 ft.
- The cupronickel ASME 206A is a different item number (017399).
- Outdoor installation as shipped, using the stackless top packed with the heater. Indoor installation needs Raypak indoor stack kit 009838 and a vent to the outside, or the D-2 power vent kit (010744 for 120 V, 009832 for 240 V).
- Pump flow between 20 and 100 GPM. Above 100 GPM Raypak calls for an external bypass valve.
- Some jurisdictions require a flow switch on ASME installations. Raypak offers kit 015889F (flange connection) or 015890F (NPT connection) for that.
Details
- Raypak lists the Digital ASME series at 82% thermal efficiency.
- Natural gas supply pressure 6 in. WC minimum, 10.5 in. WC maximum. Gas connection 3/4 in. NPT.
- ASME heat exchanger: bronze headers and copper fin tubes, HLW-stamped, 100 PSIG maximum allowable working pressure, registered with the National Board.
- A 75 PSI pressure relief valve is included, shipped loose for the 3/4 in. NPT port in the header.
- A ProTek Shield sacrificial assembly and its adapter are included, shipped loose for installation at the inlet connection. It protects the heat exchanger from galvanic corrosion.
- Electronic intermittent ignition lights the pilot and main burners automatically on a call for heat.
- Digital control with LCD display: pool and spa modes, adjustable setpoint, status and diagnostic messages. Remote-ready for two-wire or three-wire control systems.
- Unitherm Governor (thermostatic mixing valve) and a built-in automatic bypass valve in the inlet/outlet header.
- Power 120 or 240 VAC, single phase, 60 Hz, through a dual-voltage transformer; Raypak states the heater is factory-wired for 240 VAC. Draws 4 A at 120 V or 2 A at 240 V. Not for 208 VAC.
- Water connections 2 in. slip, with CPVC unions. Right-hand as shipped; Raypak lists left-hand as an optional field change.
- Cabinet 20 in. wide, 28 in. deep, 38 in. high; 40 in. to the top of the outdoor stackless top. Flue diameter 6 in.
- In the carton: outdoor stackless (pagoda) top, two 2 in. CPVC union halves with O-rings, plastic finish flange for the gas line, bonding lug, pressure relief valve, and the ProTek Shield adapter with ProTek Shield, O-ring and wing nut.
- Raypak limited warranty for ASME models: one year parts and labor.
Good to know
- Raypak rates the input for elevations up to 2,000 ft and reduces it 4% for each 1,000 ft above sea level beyond that, so order the version built for your elevation.
- The ProTek Shield is a wear item. Raypak says to replace it when its weight has dropped to about 40% of the original.
- Salt chlorinators and chemical feeders must be plumbed downstream of the heater. Raypak's water chemistry table allows up to 4,500 ppm salt.
- This is the atmospheric ASME model. Raypak's Low NOx ASME heaters are the separate 207A to 407A models.
- Gas, venting and electrical work must be done by a qualified installer or service agency and meet local codes. Raypak's warranty applies to heaters installed by a licensed service provider.
Out of stock? Get a quote.
We can usually source this item from our suppliers. Leave your details and we will text or email you a quote, typically within one business day.
Free 90-day returns. No restocking fee, prepaid label. Opened the box to check fit? Still a full refund. Details
Find It in the store: