Raypak TWPH-8550EHT08 Crosswind V 8550 Heat-Only Pool & Spa Heat Pump, 138,000 BTU, 6.0 COP, 208-230V, Rheem TWPH-8550EHT10
TWPH-8550EHT08
Raypak item TWPH-8550EHT08: Crosswind V 8550 pool and spa heat pump, Standard model, 138,000 BTU. An electric heat pump for heating pools and spas, rated 138,000 BTU/h with a 6.0 COP at 80/80/80.
Product details
| Part number | TWPH-8550EHT08 |
|---|---|
| Manufacturer | Raypak |
| Series | Crosswind V (Standard) |
| Heating capacity / COP (80,80,80) | 138,000 BTU/h / 6.0 |
| Heating capacity / COP (80,63,80) | 130,000 BTU/h / 5.8 |
| Heating capacity / COP (50,63,80) | 87,000 BTU/h / 4.2 |
| Input | 6.6 kW |
| Amps | 46 |
| Breaker | 60 |
| Weight (lbs., as listed by Raypak) | 312 / 330 |
| Rheem equivalent | TWPH-8550EHT10 |
| Ruud equivalent | TWPH-8550EHT11 |
| Raypak reference | Raypak Residential Pool & Spa Product Catalog RP-P-902-6 rev D p. 81, 95 |
The Crosswind V 8550 is the largest size in Raypak's Crosswind V line of vertical-discharge heat pumps for residential pools and spas, and this is the Standard heat-only model. The heat/cool version of this size is the Deluxe model TWPH-8550EHC08.
- For 2 in. plumbing and a 208-230 VAC, single-phase, 60 Hz supply.
- Outdoor installation only. Raypak does not certify the Crosswind V for indoor use; it cannot go in a shed or garage or under a deck or porch.
- Minimum recommended water flow 20 GPM. Above 50 GPM an external bypass is needed; Raypak bypass assembly kit 100-10000816 is sold separately for Standard models.
- Refrigerant: R-410A. Heat exchanger: titanium tube.
- Water connections: 2 in. PVC unions, reached through the front panel; two union halves included.
- Breaker 60 A minimum, 70 A maximum; Raypak recommends 60 A.
- Control: digital display with pool, spa and timed spa modes, and Wi-Fi for the Raymote app. Pool setpoint up to 95 degrees F, spa up to 104 degrees F.
- Built-in automation: outputs for two valve actuators, a single-speed or variable-speed pump and auxiliary on/off equipment; can call a gas or electric heater as auxiliary heat.
- Cabinet: powder-coated metal, about 33.8 in. W x 33.8 in. D x 37.8 in. H, four-blade fan discharging upward. Shipping carton 38.75 x 38.75 x 42.5 in.
- In the carton: four hurricane tie-down brackets with 16 screws, two union halves, optional control harnesses, manual and warranty.
- Raypak limited warranty: 2 years labor, 7 years parts and 10 years on the titanium tube of the heat exchanger, when installed by a licensed service provider.
- UPC 662021604997.
Good to know: A heat pump puts out less heat per hour than a gas heater and may run many hours a day to hold temperature; Raypak recommends covering the pool when not in use. Leave 5 ft of open space above the unit and 1 ft on each side, and keep it at least 3 ft from any fuel-burning heater. Chlorinators and chemical feeders go after the heater, with a check valve or Hartford loop between them. If the heater sits below the pool water line, the water pressure switch may need adjusting and an external water flow switch (kit H000166, not included) is required. Electrical connection is for a licensed electrician, and work on the sealed refrigerant circuit is for a qualified technician.
Out of stock? Get a quote.
We can usually source this item from our suppliers. Leave your details and we will text or email you a quote, typically within one business day.