Raypak 018038 Avia P-R264A-EP-C Pool Heater, Propane, 264,000 BTU, Copper Heat Exchanger

Wi-Fi is built into the control, so the heater can be set and watched from the Raymote phone app with no separate control panel. Rated at 84% thermal efficiency.

Made for:

• Propane (LP): 4,501 to 7,800 ft with Raypak elevation kit 018762F
• Residential pools and spas on 2 in. plumbing, with 40 to 100 GPM of flow through the heater
• Outdoor pads using the vent cap supplied with the heater, or indoor and direct-vent installations with the venting Raypak specifies in the manual
• Replacing an older heater: water and gas connections line up with common heaters; the cabinet is about 23 in. square (2x2 footprint)

Details:

• Supply pressure 8.0 in. WC minimum while firing, 13 in. WC maximum static
• Straight-tube heat exchanger design with a stainless steel combustion chamber
• Water connections: 2 in. Two 2 in. CPVC tailpieces with ring nuts and O-rings come in the carton
• Gas connection: 3/4 in. NPT. Flue: 4 in.
• Power: 240 V as shipped, convertible to 120 V, single phase, 60 Hz. Draws about 1.2 A at 240 V or 1.6 A at 120 V. Not for 208 V
• Control: touchpad with LCD display, pool and spa modes, and Wi-Fi for the Raymote app. A 3-wire remote harness is included for automation systems, and the control can run a Raypak Protege or AquaStar Smart variable-speed pump
• ProTek Shield module on the water inlet protects the heat exchanger from galvanic corrosion (replacement module 017960F)
• Cabinet: 23.24 in. wide x 23.22 in. deep x 30.38 in. high, not counting the outdoor vent cover and the water header
• Weight 135 lb, 155 lb shipping
• Also in the carton: 120 V blower adapter, auxiliary harness and Raymote quick start guide
• Certified to ANSI Z21.56 / CSA 4.7, SCAQMD Rule 1146.2 and SJVAPCD Rule 4308
• Raypak limited warranty: 3 years parts and labor when installed by a licensed installer at a single-family home; 1 year in any other setting
• Rheem cross-reference: Rheem item 018074, model P-M264A-EP-C. Ruud cross-reference: Ruud item 018098, model P-D264A-EP-C

Good to know:

• Above 4,500 ft a propane Avia needs Raypak elevation kit 018762F and gas valve adjustment by a qualified technician. Raypak does not rate propane operation above 7,800 ft
• The ProTek Shield is a wear part. Raypak says to replace it once it is down to about 40% of its original weight
• Raypak requires a sediment trap on the gas line
• Chlorinators and chemical feeders go downstream of the heater, with a check valve between them
• Keep the heater at least 3 ft from a heat pump or outdoor condensing unit
• Gas, venting and electrical work must be done by a qualified installer and meet local codes