Arctic Spas Jet Styles: Massage, Relaxation, Strength & Build Explained
Jets are the reason most people buy a hot tub instead of a stock tank full of warm water. They decide whether a soak works out the knot in your shoulder, lets you drift off after a long day, or just leaves your skin itchy from a needle-thin stream. Arctic Spas® builds its jets around four things: massage, relaxation, strength, and build. Here's what each Arctic jet style does, where it sits, and what to look for in any hot tub's jets.

Quick Answer: What Jet Styles Do Arctic Spas Use?
Arctic Spas use large, rotating jets only, with no fixed directional jets added to pad the jet count. Every jet spins its stream in a wide circle, and each one can be twisted from gentle to firm, or off, right at the seat.
The lineup runs from 3-inch jets for the neck and shoulders, to 5-inch hydro-massage jets for the back, to the Monsoon jet for feet, legs, and hips, up to six 7-inch SDS jets on their own pump for deep-tissue work. Behind them, the jets are bearing-less and thread in, and 3 HP pumps sit close to the jets they feed.
What a Good Hot Tub Jet Has to Do
Move Like Hands, Not a Hose
A fixed stream hits the same spot of skin over and over. A rotating jet sweeps a wide circle and breaks up the flow, which feels much more like a therapist working a muscle than a pressure washer.
Let You Turn It Down
Some nights you want a deep massage. Other nights you just want warm water and quiet. Every Arctic jet twists down to a soft flow or off, so the same seat can do both.
Have the Pressure to Back It Up
Big jets need real water behind them. Pump count, pump size, and how far the water travels to reach each jet decide whether a jet hits hard or just bubbles.
Keep Working for Years
Jets sit in hot, sanitized water every day. Bearings seize and plastic tabs get brittle. Arctic's jets have no bearings and screw into place, so there's less to wear out.
Arctic Spas Jet Styles, Seat by Seat
Every Arctic Spa mixes these jet styles across its seats and lounges. Which ones you get, and how many, depends on the model and pump package.
3-Inch Rotating Jets
Custom and Classic Series · Core Series uses a 2.5-inch version
The smaller jets are placed where muscles are tighter and closer together. They give a wide, circular massage aimed at the upper back, shoulders, and neck.
- Massage: Focused circles across the shoulders and up the neck
- Relaxation: Turn them down for a gentle neck-and-shoulder warm-up
- Strength: Twist the face clockwise for firmer, counterclockwise for softer
- Best for: Desk-job shoulders, stiff necks, tension headaches from a long day
5-Inch Hydro-Massage Jets
Custom and Classic Series · Core Series uses a 4-inch version
The workhorse jet. A broad, rotating stream that covers a large area of the back at once, so you feel a sweeping massage instead of a single pressure point.
- Massage: Wide circles across the mid and lower back
- Relaxation: At low flow, it's a soft, rolling feeling that's easy to sit in for a full soak
- Strength: Fully adjustable, and can be locked fully open for maximum flow
- Best for: General back soreness and anyone who likes a broad, full-back massage
Monsoon Jet
Custom and Classic Series
A large hydro-massage jet set low in the spa. It focuses its flow on one area, and because of where it sits, that's your feet, legs, hips, and lower back.
- Massage: Concentrated flow on the lower body
- Relaxation: A favorite for tired feet and legs after a day standing or a long run
- Strength: Adjusted with a diverter valve on the spa's top edge, so you can send more or less water to it
- Best for: Feet, calves, hips, and lower-back stiffness
SDS Seat: Six 7-Inch Jets on Their Own Pump
Custom Series option on select models
SDS stands for Super Duper Seat, and it's Arctic's strongest massage. Six large 7-inch jets are driven by a pump that does nothing but feed that one seat, so it never shares pressure with the rest of the spa.
- Massage: Deep, full-back work for aches that need more than a gentle jet
- Relaxation: A built-in timer shuts SDS off after 20 minutes, so you can relax without watching the clock
- Strength: A dedicated pump for just six jets, the most pressure per jet in the lineup
- Best for: Post-workout recovery, physical jobs, and anyone who says "harder" at a massage
Some models also add neck jets, a waterfall, and air controls, each run from a valve on the spa's top edge. Jet sizes and counts vary by model and pump package; we'll walk you through the layout of any spa on our floor.
Massage: Why Arctic Jets Rotate
A lot of hot tubs advertise a high jet count. What matters more is how each jet moves water. There are two basic approaches:
Directional (Fixed) Jets
Push a stream of water in one direction. They're inexpensive, so they're often used to raise the jet count. The steady, unbroken stream can make skin feel irritated or itchy after a few minutes, and it doesn't do much for circulation.
Rotating Jets (All Arctic Jets)
Spin the stream in a wide circle. Arctic's newer jet faces add three breaks in the flow, so the water briefly lets up as it passes over your skin. That on-off rhythm is closer to massage hands and avoids the itchy, needle-point feeling.
Size matters, too. Arctic sticks to large jets because a few dozen big rotating jets cover more muscle than a hundred tiny fixed ones. Small jets concentrate force on a small patch of skin, the same problem directional jets have.
Relaxation: How to Set Up a Soak for How You Feel
The same Arctic Spa can be a deep-tissue massage table or a quiet place to unwind. It's all in a few twists:
Twist the Jet Faces
Each jet turns clockwise for more flow and counterclockwise for less, all the way to off. Turn down the jets you don't want and leave the rest.
Use the Diverters
Diverter valves on the top edge send water toward one group of seats or another, or to the Monsoon jet. Shift the pressure to the seat you're sitting in.
Add or Remove Air
The air control (venturi) mixes air into the jets for a more vigorous, bubbly feel. Close it for a smoother, quieter flow. Leave it closed when the spa isn't in use.
Pick Your Seat
Lounges, deep seats, and the SDS seat each place jets differently. Move around until you find the one that fits the night.
Strength: Where the Pressure Comes From
A big jet is only as good as the water pushed through it. Arctic Spas builds pressure three ways:
More Pumps, More Massage
Arctic's own guidance is simple: massage intensity goes up with the number of pumps. Most Arctic models can be ordered with one to four pumps, and each pump powers its own group of jets, so seats don't steal pressure from each other. Arctic's 2020-and-newer Custom and Classic spas use 3 HP pumps.
Pumps Placed Behind the Jets
In many hot tubs, pumps sit in one corner and push water through long runs of pipe and sharp turns to reach the far seats, losing pressure along the way. Arctic staggers its pumps around the cabinet and places them directly behind the jets they feed whenever possible.
Dedicated Power Where It Counts
The SDS seat gets a pump all to itself. That's why it's the strongest massage in the lineup: six jets, one pump, no sharing.
Example: The Arctic Spas Summit
Here's how the same spa changes as you add pumps. More pumps bring more jets and more pressure to each one, and the top package adds the SDS seat.
Prestige
20 jets · 1 pump
Signature
40 jets · 2 pumps
Legend Select
60 jets · 3 pumps
Legend Select + SDS
60 jets · 4 pumps
Summit packages as listed by Arctic Spas, checked November 2026. Legend Select + SDS adds the SDS seat and its dedicated fourth pump. Ask us for the current packages on any model.
Build: Jets That Keep Working
No Bearings to Seize
Many rotating jets spin on small bearings that can corrode, stick, and stop rotating. Arctic's jets rotate and oscillate without bearings, so there's nothing to seize up.
Thread-In, Not Snap-In
Many jets are held in place by flexible plastic tabs. Over years in hot water, those tabs get brittle and snap off. Arctic's jets screw into the jet body, a change Arctic says has nearly eliminated jet failures.
Easy to Swap Out
Because they thread in, jets unscrew by hand for cleaning or replacement. No tools, no draining the whole spa, no service call just to change a jet face.
Low-Profile and Corrosion-Resistant
Arctic's low-profile jets sit close to the shell, so nothing pokes into your back, and their corrosion-resistant finishes are made to hold up to chlorine and salt water alike.
How Arctic Jets Compare to Other Jet Styles
Most hot tubs, from premium showroom brands to plug-and-play spas sold online, use some mix of these jet styles. Many spas combine more than one.
| What Matters | Small Directional Jets | Clusters of Many Small Jets | Rotating Jets on Bearings | Arctic Spas Rotating Jets |
|---|---|---|---|---|
| Massage | One fixed stream that hits the same spot | Many small streams, often fixed, covering a patch of the back | A spinning stream that moves across the muscle | A wide spinning stream with breaks in the flow, like massage hands |
| Relaxation | Can feel needle-like or itchy on longer soaks | Comfortable, but often a light, tingly feel | Comfortable while the bearings spin freely | Twist each jet from soft to firm, or off, at the seat |
| Strength | Concentrated force in one small spot | Pump power spread across many small openings | Depends on pump size, count, and plumbing | Large 3", 5", and 7" jets fed by 3 HP pumps placed near the jets; dedicated SDS pump |
| Build | Simple, but often snap-in with plastic tabs | More openings and fittings to maintain | Bearings can corrode and stop spinning | Bearing-less, thread-in, unscrews by hand |
| Jet count | Often used to raise the advertised count | High counts, since each small nozzle may be counted | Varies by model | 20 to 60 large jets, depending on model and pump package |
Compiled from published jet and construction details on each major hot tub manufacturer's website, checked November 2026. Jet styles differ by brand, series, and model, so ask about the exact model you're considering.
Which Arctic Spas Get Which Jets?
- Custom Series: 3-inch and 5-inch rotating jets, the Monsoon jet, and the SDS seat with six 7-inch jets on select models. Up to four pumps.
- Classic Series: 3-inch and 5-inch rotating jets and the Monsoon jet.
- Core Series: 2.5-inch and 4-inch rotating jets, sized for Core's more compact spas.
Shopping for a Spa? Ask Every Dealer These Questions
Jet count is the easiest number to advertise and the least useful one. These questions tell you how a spa will actually feel:
- Do all the jets rotate, or are some fixed directional jets?
- How big are the jets? Are most of them 3 inches or larger?
- How many pumps, and how big? How many jets does each pump feed?
- Where are the pumps? How far does the water travel to reach the far seats?
- Can I adjust each jet at the seat? Can I turn it all the way off?
- Do the jets have bearings? Do they snap in or screw in, and how do I replace one?
- Can I sit in it? A wet test is the best way to feel the difference.
Frequently Asked Questions
Are more jets always better?
No. Jet size, style, placement, and pump power matter more than the count. Forty large rotating jets with good pressure will out-massage a spa with twice as many small fixed jets. Placement matters too: one jet in the right spot beats several in the wrong one.
Can I make the jets gentler?
Yes. Every Arctic jet twists counterclockwise for a softer flow and all the way to off. You can also close the air control for a smoother feel or use a diverter to shift pressure away from your seat.
What's the strongest massage in an Arctic Spa?
The SDS seat, available on select Custom Series models. Its six 7-inch jets run on their own dedicated pump, so that seat gets full pressure no matter what the rest of the spa is doing.
Can a hot tub massage help sore muscles?
Many people find that warm water and a moving massage help them loosen tight muscles and unwind after a workout or a long day. If you have a medical condition, are pregnant, or are recovering from an injury, check with your doctor before using a hot tub.
How do I replace an Arctic jet?
Turn the spa off, lower the water below the jet, then unscrew the jet counterclockwise by hand and thread the new one in. We stock Arctic replacement jets, and older snap-in jet bodies can often be converted to the thread-in style.
Can I try the jets before I buy?
Yes. Ask about a wet test at our Chanhassen showroom. Bring a swimsuit and try a few seats, including the SDS seat, before you decide.
Feel the Difference in Chanhassen
Premier Pool & Spa is the Twin Cities' Arctic Spas showroom. Come see the jet layouts up close, compare pump packages, and ask about a wet test to find the seat that fits you.
Premier Pool & Spa
2985 Water Tower Place
Chanhassen, MN 55317
Call or text: 952-368-6070
This article is for general information only and isn't medical advice. Product images courtesy of Arctic Spas®. Arctic Spas®, Pepperleaf Pulse™, and SDS are trademarks of Blue Falls Manufacturing.