What Is the Arctic Spas Composite Shell? The Self-Supporting Hull Behind the Acrylic

The shell is the part of a hot tub you sit in, so it's easy to judge it by color and seat shape. But a filled spa with people in it can weigh 4,000 to 5,000 pounds, and the shell carries all of it, every day, for years. What the shell is made of, and what's behind it, decides how long it lasts, how warm it feels, and how easy it is to repair. Arctic Spas® builds its shells differently from most brands. It's called the composite shell.

Quick Answer: What Is the Arctic Spas Composite Shell?

It's a hot tub shell made of two layers working together: a cast acrylic surface you see and sit on, backed by multiple layers of hand-applied, filler-free fiberglass underneath.

That fiberglass makes the shell self-supporting, so it doesn't need foam, wood frames, or props underneath to hold its shape. With nothing packed against it, heat from the pumps reaches the water and the seats, and a technician can get to the plumbing directly. On Custom Series spas, the shell structure carries a lifetime warranty.

Watch: The Composite Shell

Arctic Spas covers the shell in this short video. The full breakdown follows below.

Video courtesy of Arctic Spas®.

How Most Hot Tub Shells Are Built

Most hot tubs are made one of two ways: a sheet of acrylic shaped into seats and footwells, or a single piece of rotomolded plastic. Either way, something has to give the shell the strength to hold thousands of pounds of water.

Acrylic Shells: How They're Usually Supported

Acrylic alone can't carry a full spa, so it needs a backing and, often, a frame. Across the industry, that support usually comes from some combination of these:

  • Thin plastic backing plus foam. The acrylic is backed with a layer of ABS plastic or a thin laminate, and the cabinet is packed with spray foam that helps hold the shell in shape and supports the plumbing.
  • Frames, beams, or props. Wood, metal, or molded plastic supports sit under the seats and floor to help the shell carry the load. Arctic builds that strength into the shell itself: its hand-applied fiberglass backing carries the water and bathers by itself, so the shell needs nothing underneath to hold it up.
  • Fiberglass with filler. Some shells add a mineral filler to the fiberglass resin. Arctic uses filler-free resin.

Rotomolded Spas: Shell and Cabinet in One Piece

Many lower-priced and plug-and-play hot tubs, including many sold through Costco and Wayfair, aren't acrylic at all. They're rotomolded: polyethylene plastic is spun inside a heated mold to form the seats, walls, and outer cabinet as one hollow piece, which is often filled with foam. That makes them light, affordable, and quick to set up, and many plug into a standard 120V outlet.

The trade-offs: the plastic has a duller, textured finish, the seats are usually less contoured, and polyethylene is hard to patch if it cracks. Equipment warranties are often short, too. A rotomolded spa can make sense for a tight budget or a short-term setup, but it's built for a different job than a spa expected to run year-round through Minnesota winters for many years.

Most of these differences aren't obvious in the showroom or in an online listing. They show up later, when a seat flexes, a leak has to be found under a foot of foam, a crack can't be repaired, or the warranty on the structure turns out to be shorter than you thought.

How the Arctic Spas Composite Shell Is Built

1

Cast Acrylic Is Formed

A sheet of cast acrylic is heated and vacuum-formed over a mold to create the seats, footwell, and lounges. This is the glossy surface you see and feel.

2

Fiberglass Is Applied by Hand

Multiple layers of fiberglass are applied to the underside and rolled out by hand for an even coat, with no thin spots. Arctic uses filler-free resin, so the backing is all structure.

3

The Shell Holds Itself Up

Once cured, the fiberglass gives the shell enough strength to carry the water and bathers by itself. No foam fill, frames, or props are needed under the seats, so there's nothing pressing into the shell from below.

4

Jets and Lights Are Cut Precisely

Openings for jets and lights are cut by water-jet robots and automated cutting stations, so every fitting lands where it should.

Arctic Spas composite shell with acrylic surface and fiberglass backing
Arctic Spas composite shell. Image courtesy of Arctic Spas®.

What That Gets You

Strength Without Supports

A self-supporting shell has no beams or props to wear, shift, or puncture it. The fiberglass carries the load evenly across the whole shell.

Seats That Feel Warm

With no foam packed against the back of the shell, warm air in the cabinet reaches the acrylic. Seats are warm to the touch when you climb in on a cold night.

Heat That Moves Both Ways

Pump heat passes through the shell into the water, and in a power outage the water's stored heat passes back out to protect the equipment. That's the core of Arctic's FreeHeat™ system.

Repairs Without Digging

Because the shell needs no foam to hold it up, the plumbing and jet fittings stay out in the open. A technician can see a leak and fix it without cutting through insulation.

How Arctic Spas Compares to Other Brands

Here's how the hot tub brands Twin Cities shoppers most often compare describe their own shell construction and shell warranties. Each brand offers several series, so we've listed its premium line and noted where lower-priced lines differ.

Brand Shell What Supports It Insulation Approach Shell Warranty (Structure / Surface)
Arctic SpasCustom & Classic Series Cast acrylic backed with multiple layers of hand-applied, filler-free fiberglass The shell supports itself; no frame, foam, or props under the seats Insulated cabinet walls, floor, and cover around an open, foam-free equipment area (FreeHeat™) Custom: lifetime structure for as long as the original owner has the spa, 5 years surfaceClassic: 10 years structure, 3 years surfaceAt Premier Pool & Spa: surface coverage continues to 7 years on Custom and Classic spas, backed by Premier. DetailsSources: warranty · shell
Hot SpringHighlife Collection Acrylic. Hot Spring describes acrylic shells as reinforced with resin and fiberglass. Polymer structure and base pan. Hot Spring says its foam layers also add structural support. Multi-density full foamLimelight: FiberCor® fiber insulation 7 years on the acrylic shell, covering leaks and defects in materials or workmanshipLimelight: 7 years no-leak shell, 5 years surface
Cal SpasPlatinum™ Series Acrylic with a patented 7-layer laminate reinforced with steel and wood Pressure-treated wood cabinet frame with steel fasteners, gussets, and bracing Cabinet-wall and floor insulation, plus full foam in the spa structure; features vary by series 10 years structure, 7 years surfacePatio Series: 10 years structure, 3 years surfaceApplies to models built on or after October 11, 2024
Bullfrog SpasA, M & STIL Series Acrylic Injection-molded ABS EnduraFrame™ with structural columns; no wood or metal 100% closed-cell full foam 10 years structure, 7 years surface, plus a lifetime warranty on the EnduraFrame™ for the original ownerX Series: 5 years structure and frame, 3 years surface
Master SpasMichael Phelps Legend Series Acrylic Engineered frame reinforced with a vac-formed polymer base pan Expanding foam that insulates and air-seals the spa and supports the plumbing 10 years structure, 7 years surfaceLH Series: 3 years structure, 3 years surface
Costco / Wayfair plug-and-play spase.g. Aquaterra rotomolded spas at Costco One-piece rotomolded polyethylene The molded plastic body and its internal supports Varies by model Aquaterra: 5 years structure, 5 years shell surface1 year on equipment and labor

Compiled from each manufacturer's own website and published warranty documents, checked November 10, 2026. "Lifetime" terms apply to the original owner. Warranty terms differ by series and model year and can change, so confirm the details for the exact model you're considering. Aquaterra spas are warranted by Watkins Manufacturing Corporation, the company behind Hot Spring. Premier Pool & Spa's added coverage is backed by Premier, not Arctic Spas, and applies to spas with a deposit placed after November 10, 2026.

Arctic Spas hot tub in a backyard setting
Image courtesy of Arctic Spas®.

Why It Matters in Minnesota

Built to Carry the Load, Year-Round

A Minnesota hot tub stays full and hot through every season, from summer heat to weeks below zero. A shell that holds itself up with fiberglass, instead of leaning on foam, frames, or props, keeps carrying that load the same way year after year.

Warm Seats on the Coldest Nights

Climbing into a hot tub at -10°F is a lot nicer when the seat you sit on is warm, too. The open cabinet behind an Arctic shell keeps the acrylic warm, not just the water.

Part of the Freeze Protection Plan

The shell is one of the four pieces of FreeHeat™, along with the insulated cabinet walls, the Mylovac™ cover, and the Forever Floor® base. Because heat moves freely through the shell, the hot water helps keep the equipment above freezing during a winter power outage.

Faster, Simpler Service

When something does need attention, a technician can open a cabinet door and see the plumbing behind the shell. Less time hunting through foam means less time on the bill.

Structure and surface are warrantied separately. Most brands list a structure warranty (water loss from structural failure) and a shorter surface warranty (cracks, blisters, and peeling in the acrylic). Some list only one. Whichever brand you're looking at, ask for both numbers and which series they apply to. See our Arctic Spas warranty quick guide.

Which Arctic Spas Have the Composite Shell?

  • Custom Series: Composite shell standard, with a lifetime structural warranty.
  • Classic Series: Same composite shell construction, with a 10-year structural warranty. A Classic spa with the Upgrade to Custom option gets the Custom Series warranties.
  • Core Series: Uses Arctic's Elastocast™ shell, an ABS-backed acrylic sprayed with a heat-transferring composite. It's also self-supporting and beam-free, with a 7-year structural warranty.

Shopping for a Spa? Ask Every Dealer These Questions

Whatever brand you're considering, in a showroom or online, these questions will tell you how the shell is really built:

  1. What is the shell made of? Acrylic or rotomolded plastic, and what's behind it?
  2. Does the shell hold itself up? Or does it need foam, a wood or plastic frame, or props underneath?
  3. Is there filler in the fiberglass resin?
  4. If the shell cracks or a fitting leaks, what does the repair look like? Will someone have to cut through foam?
  5. How long is the shell structure warrantied, and how long is the surface? Does that apply to this series?
  6. Can heat from the pumps reach the water?

Frequently Asked Questions

Is the shell acrylic or fiberglass?

Both. The surface you sit on is cast acrylic. The structure behind it is layers of fiberglass. Together they make the composite shell.

What's the difference between an acrylic hot tub and a rotomolded one?

An acrylic spa has a glossy, contoured acrylic shell set inside a separate cabinet. A rotomolded spa is one molded piece of polyethylene plastic, shell and cabinet together. Rotomolded spas, like many plug-and-play models sold at Costco and Wayfair, are lighter and usually cost less, but they have a plainer finish and fewer contoured seats, and they're harder to repair if the plastic cracks.

How does the Arctic shell compare to Hot Spring, Cal Spas, Bullfrog, or Master Spas?

All four use acrylic shells. Where they differ is what holds the shell up: a polymer structure and base pan on Hot Spring's Highlife, a pressure-treated wood frame on Cal Spas, a molded ABS frame on Bullfrog, and an engineered frame with a polymer base pan on the Master Spas Legend Series. Arctic's shell is backed with filler-free fiberglass and supports itself, and its Custom Series shell structure carries a lifetime warranty for the original owner. See the comparison table above.

If there's no foam on the shell, won't the spa lose heat?

No. Arctic insulates the cabinet walls, the floor, and the cover instead, so the heat stays inside the spa and can move between the equipment and the water. Here's how FreeHeat™ works.

What does "self-supporting" mean?

It means the shell carries the weight of the water and bathers on its own. It doesn't rely on foam fill, wood frames, or props placed underneath the seats.

Do all Arctic Spas have the composite shell?

Custom and Classic Series spas do. Core Series spas use the self-supporting Elastocast™ shell.

Can I see the composite shell in person?

Yes. We have Arctic Spas on display in our Chanhassen showroom, and we're happy to open a cabinet door so you can see what's behind the shell.

See the Composite Shell in Person in Chanhassen

Premier Pool & Spa is the Twin Cities' Arctic Spas showroom. Come see the lineup, look inside a cabinet, and talk through which model fits your yard and your winter.

Premier Pool & Spa
2985 Water Tower Place
Chanhassen, MN 55317
Call or text: 952-368-6070

Images and video courtesy of Arctic Spas®. FreeHeat™, Forever Floor®, Mylovac™, Total Access™, Elastocast™, and Arctic Spas® are trademarks of Blue Falls Manufacturing. Hot Spring®, FiberCor®, Cal Spas®, Bullfrog Spas®, EnduraFrame™, Master Spas®, Aquaterra® and other brand names are trademarks of their respective owners. Premier Pool & Spa is not affiliated with these brands.