Dolphin LIBERTY 300 cordless robotic pool cleaner (Maytronics 99998130-US), front three-quarter view
Dolphin LIBERTY 300 cleaning the floor of a tiled pool
Dolphin LIBERTY 300 climbing and scrubbing a pool wall underwater
Shaking the Click-Up Clicker in the water to call the Dolphin LIBERTY 300 to the wall
Dolphin LIBERTY 300 cordless robot on the pool deck

Maytronics 99998130-US Liberty 300 Cordless Robotic Pool Cleaner <=33' Pools, 2YW

99998130-US

Regular price$1,249.00
/
Shipping calculated at checkout.

Dolphin LIBERTY 300 (99998130-US) at a glance

The LIBERTY 300 is Maytronics' mid-range cordless Dolphin. It runs on a sealed lithium-ion battery, charges by snapping onto a magnetic inductive charger (no plug, no exposed pins), and comes back to you when you shake the included Clicker in the water. It's a good fit for owners who want a Dolphin without a cable on the deck and don't need app control.

  • Coverage: floor, walls and waterline, with an active scrubbing brush
  • Cycle: default cycle about 1.5 hours per charge; Floor-only and Eco Mode selectable on the robot
  • Charging: Magnetic-Connect inductive charger, up to 6 hours to full
  • Retrieval: Click-Up (shake the Clicker and it climbs to the nearest wall) plus end-of-cycle wall parking
  • Filtration: top-access basket with fine and ultra-fine filter panels included
  • Pool size: up to 33 ft long; in-ground and above-ground
  • Warranty: 2-year limited (Maytronics)

Our pairing pick: add a Betta SE Plus solar skimmer

Most of what ends up on your pool floor starts out floating: leaves, pollen, bugs and dust. The Betta SE Plus solar robotic skimmer patrols the surface all day on solar power and catches that debris before it sinks. With the surface handled, the LIBERTY 300 has less to pick up, its filter basket fills more slowly, and you won't need to run (or charge) it as often. Both units are cordless, so there's no cable for the robot to tangle with while they share the pool.

Shop the Betta SE Plus →

See it in action

Maytronics overview (LIBERTY 200 | 300 | 400)

Independent review: Swimming Pool Lab

Charging & battery: what to expect

The most common surprise with any cordless robot: one charge = one regular cleaning cycle. It isn't charged once a week like a phone. After a regular cycle, take it out, rinse the filter basket, and set it on the charger. A full charge takes up to 6 hours. The one exception is Eco Mode (below), which stretches a single charge across a week of short floor-only cleans.

Situation What to plan for
Normal weekly upkeep Pick one of two routines: a regular cycle (floor, walls and waterline) followed by a recharge, as often as your pool needs; or Eco Mode for a lightly used, covered or low-debris pool, then a full cycle and recharge when the walls and waterline need attention.
Eco Mode Cleans the floor only for up to 40 minutes, three times a week, for about a week on one charge. Walls and waterline are not cleaned in Eco Mode. At the end of the week, take it out, rinse the filter and recharge. Using the Clicker between Eco cycles ends Eco Mode.
Spring opening / pool closed all winter This is not a one-charge job, and not an Eco Mode job. Winter leaves and silt fill the basket fast, and a full basket hurts suction and climbing. Net out the big debris, get the water clear and above 43°F (warmer is better), use the fine filter panels for the first heavy cleanups, then plan on several regular cycles over a few days, rinsing the basket and recharging between each.
Fine dust, pollen, silt Switch to the included ultra-fine panels once the heavy debris is gone.
Real-world run time A regular cycle runs about 1.5 hours. Run time depends on mode, pool size and debris. Like any lithium-ion battery, it slowly drops over the seasons. The battery is sealed and not user-replaceable.
End of a cycle In the last few minutes it climbs each wall and pauses about 20 seconds at the waterline to be lifted out. If nobody grabs it, it parks on the floor next to a wall. Shake the Clicker in the water for 3+ seconds and it climbs to the nearest wall; Click-Up works for up to 2 days after a regular cycle ends. The grab hook is the backup.
Battery bars dark when you go to use it With a low battery it drops into standby and the lights go out. Connect it to the charger to wake it.
Where to keep it Charge it in a shaded, protected spot. The charger must plug straight into a GFCI-protected outlet (no extension cord). Heat is what shortens lithium battery life.
Winter storage Unlike some brands, Maytronics says to store it at about half charge (2 green bars), somewhere between 14°F and 104°F, then fully charge it before the first use of the season.

Cleaning modes

Mode Covers How long How to select
Regular (default) Floor, walls and waterline About 1.5 hr Press ON
Floor only Pool floor Shorter than regular Cycle selector on the robot (purple light blinks 3 times)
Eco Mode Pool floor Up to 40 min, 3 times a week, about a week per charge Hold ON 7–10 seconds until the light flashes purple then green; put it in the pool within 30 seconds

The LIBERTY 300 has no app. If you want app control, scheduling options and push notifications, step up to the LIBERTY 400.

LIBERTY 200 vs 300 vs 400 vs 600

Feature LIBERTY 200 LIBERTY 300 (this model) LIBERTY 400 LIBERTY 600 Deluxe
Max pool length 33 ft 33 ft 33 ft 50 ft
Floor, walls, waterline Floor and walls only Yes Yes Yes, plus steps
Eco Mode Yes Yes Yes (plus app-set options) Yes, scheduler; 1–2 weeks per charge
Floor-only cycle selector No Yes Yes (app) Yes (app programs)
Click-Up retrieval No Yes Yes Yes, plus homing
Battery 25.2 V, 5 Ah (126 Wh) 25.5 V, 9.6 Ah (245 Wh)
Run time About 1.5 hr About 1.5 hr About 1.5 hr 3 hr default, up to 4.5 hr
App No No MyDolphin Plus Maytronics One (incl. filter status)
Warranty 2 years 2 years 3 years 3 years

See all our robotic pool cleaners →

Minnesota owners: temperatures that matter

  • Operating water temperature: 43°F to 95°F, so it can start earlier in a cold May than many robots.
  • Charging temperature: 43°F to 95°F. On cold spring and fall nights, charge it in the garage, not on the deck.
  • Off-season: bring it indoors at half charge (see storage above); don't leave it in a hot shed or a freezing one.

Water chemistry limits

Per the Maytronics manual: chlorine up to 4 ppm, pH 7.0–7.8, salt up to 5,000 ppm. It's fine in typical saltwater pools; keep it out of the water during a shock treatment until chlorine is back below 4 ppm.

Specifications

Part number 99998130-US (Maytronics Dolphin LIBERTY 300)
Pool type In-ground and above-ground; vinyl liner, gunite/plaster, fiberglass
Pool size Up to 33 ft long
Pool depth 1 ft minimum, 9.8 ft maximum
Coverage Floor, walls, waterline (active scrubbing brush)
Default cycle About 1.5 hours
Battery Lithium-ion, 25.2 V, 5 Ah (126 Wh), non-replaceable
Charge time Up to 6 hours (3 green bars = full)
Charger Magnetic-Connect inductive, IP54; GFCI/RCD-protected outlet required
Filtration Top-access basket; fine and ultra-fine panels included
App No
Robot weight About 17.9 lb
Package dimensions 22.2 × 17.6 × 12.6 in
Warranty 2-year limited

What's in the box

  • Dolphin LIBERTY 300 cordless robot
  • Magnetic-Connect charger
  • Click-Up Clicker
  • Filter basket with fine and ultra-fine filter panels
  • Grab hook (attaches to your own pool pole, not included)
  • Impeller cleaning tool and accessories organizer

Care after each use

  • Hose out the filter basket right after you lift the robot out, before debris dries and hardens.
  • Once a month, take the ultra-fine panels apart and rinse them.
  • Now and then, use the included tool to clear hair and debris from the impeller.

Common questions

How often do I need to charge it?
After every regular cycle. The only time it goes a week between charges is in Eco Mode, which cleans the floor only.

Can it clean my pool right after opening in the spring?
Yes, but plan on several regular cycles over a few days, not one, and rinse the basket and recharge between runs.

Does it have an app or a timer?
No. Cycles are started on the robot. Eco Mode is the closest thing to a schedule. For app control, see the LIBERTY 400.

Will it work in an above-ground pool?
Yes. Maytronics rates the LIBERTY 300 for in-ground and above-ground pools at least 1 ft deep.

How does it compare to other robots?
See our robotic pool cleaner lineup, or stop in at our Chanhassen store and we'll walk you through it.

Manuals & documents

Also searched as: Dolphin Liberty 300, Maytronics Liberty 300, 99998130, Dolphin cordless robotic pool cleaner, battery pool robot, wireless pool vacuum.

Free 90-day returns. No restocking fee, prepaid label. Opened the box to check fit? Still a full refund. Details
Find It in the store:R-E-TA-L

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like


Recently viewed